1. Hour hand
2. Minute hand
3. Crown
4. Crown - first click
5. Crown - second click
6. Date window
7. Second hand
8. GMT hand

Set the time Move the crown to position 5 and turn (remember the 24-hour cycle).

Set the date* Move the crown to position 4 and turn clockwise.

Set the GMT time Move the crown to position 4 and turn counterclockwise.

* The date can be corrected during the day-changing phase between 10 pm and midnight. The date of the following day has to be set, however, as the date will not automatically change at midnight.

• Movement: Swiss Ronda 515 GMT quartz
• Water resistance: 30 ATM / 300 m / 1000 ft
• Features: Japanese lumen, Swiss movement, GMT function.
• Battery: Renata 371
• Crystal: Domed sapphire glass with anti-reflective coating
• Case material: 316L stainless steel
• Strap material: Rubber
• Nickel free: Yes
• Max. wrist size: 8 1/4" (21 cm)
• Min. wrist size: 6 1/8" (15.5 cm)
• Strap width: 4/5" (20 mm)
• Case diameter: 1 5/8" (42 mm)
• Dial diameter: 1 1/3" (30 mm)
• Case thickness: 1/2” (13 mm)
• Crown height: 1/5" (4 mm)
• Lug width: 7/8" (22 mm)
• Lug to lug: 1 7/8" (48 mm)
• Weight: 3.1 oz (88 g)

Most watches have some level of water resistance. If your watch isn’t water resistant, it may be able to handle small splashes, but don’t risk it. If it has a leather strap, don’t get it wet.

• Do not move the crown or push any buttons when your watch is in contact with water, as this may let water enter the case.
  
• If your watch is not water resistant, dip a cotton swab in a bowl of warm water with a drop or two of soap in. Squeeze the tip of the cotton swab to remove most of the water and gently rub the case.
  
• If your watch is water resistant, soak a soft cloth in a bowl of warm water with two drops of mild washing-up liquid added. Wring most of the water out of the cloth and gently rub the case with it.
  
  

The reason rubber and silicone straps are so popular among men who lead active lifestyles is that they repel both dirt and liquid, so they require very little maintenance, keep their shape and color for a long time, and won’t smell like some absorbent materials will.

1. If your watch is water resistant, rinse the whole watch with room temperature water.
2. If your watch is not waterproof or water resistant, remove the strap from the case before following these instructions.
3. Keeping the case above the surface, submerge the strap in warm, soapy water for a few minutes. Do not submerge the case as this may deform the springs and gears, causing it to become inaccurate or stop working entirely.
4. Rinse the watch again with room temperature water and rub off any grime or dirt with a soft brush or your fingers.
5. Pat your watch dry with a soft towel to prevent staining and let it air dry through the night.

• Store your watch in a dark, dry place to avoid corrosion and discoloration of the dial.
• Always replace the battery on a quartz watch as soon as it runs out. With time, an empty battery may start leaking, damaging the watch’s movement.
• Run mechanical watches at least two days a year to prevent gears and cogs from sticking.
• You should always get your watch serviced by a professional every 3 years.

Rule of thumb: Make sure your watch is the last thing you put on and the first thing you take off. - Take your watch off and store it safely before engaging in any activity that could damage it. - Take it off before engaging in any activity likely to make you sweat. - Take it off before you shower, bathe, or go for a swim. - Take it off before cooking or cleaning. - Take it off before you go to bed. - Don’t expose your watch to chemicals such as cologne, sunscreen, perfume, chlorine, hair gel, etc., as these can discolor, stain, or dull surfaces. - Try to store your watch separately in a soft enclosure to prevent scratching and rubbing. - If your watch has closures or clasps, close these to prevent tangling. - Keep your watch stored in a dry, dark place, and avoid heat fluctuation.

To remove and change your watch strap, you’ll need:

- The watch

- A replacement strap

- A soft surface such as a cloth, t-shirt, or mouse pad

You may also need:

- A spring bar tool

- Or a sharp pointed object

1. Place your watch on a soft surface. This prevents it from getting scratched or damaged.
   
   
2. If your watch has quick-release pins on the underside, push the small lever inward to release the strap.

1. If your watch has drilled lugs – small holes in the lugs extending from the main watch case – use a sharp, pointed object to push the spring bar in and release the strap. Be careful that the spring bar doesn’t slide out of the strap and get lost.

1. If your watch strap has neither of these, use a spring bar tool. This is a small tool with a v-shaped tip. Use it to compress the spring bar from the underside of the strap between the lugs on the right. Using the tool, push down the ridge of the spring bar to release the strap.

First, check the lug width of your new watch to verify that it’s ⁷⁄₈” (22 mm). You can find all our watch straps here. Using the filters, select only the matching width to see our selection for your watch.

If your replacement strap has quick-release bars, press the bar inward and slot it into place between the lugs. You’ll feel it ‘lock’ into position. If your new strap doesn’t have quick-release pins, use the spring bar tool again. Place one end of the pin into place, then use the tool to compress the spring bar as you slot it in place. You’ll feel it ‘lock’ in position. Remember to take your time and be careful not to scratch the lugs or damage the new watch strap.

If you take care of your watch and keep it stored correctly, you should enjoy years of timekeeping precision. But even with the best care possible, you may find that your watch needs extra attention from time to time.

Take a look at common issues with watches here. If you can’t find what you’re looking for, our great Customer Service Team is only a phone call away.

To keep the warranty on your watch valid, don't expose it to water past the rated limit and make sure you keep the receipt.