1. Hour hand
2. Chronograph minute subdial
3. Minute hand
4. Button D
5. Crown
6. Crown - first click
7. Crown - second click
8. Button E
9. Date window
10. Second subdial
11. Chronograph second hand

Set the time Move the crown to position 6 and turn. If the crown is pulled to position 6 while the chronograph is running, the chronograph hands will continue to move. This is normal.

Set the date: Move the crown to position 6 and turn counterclockwise. If the date is set between the hours of 21:00 and 03:00, the date may not change on the following day.

Measuring time with the chronograph: The chronograph can be started and stopped with the D button. Pressing the E button resets the chronograph, and the chronograph's second, minute, and hour hands return to 0.

Chronograph reset (incl. after battery replacement): This procedure should be performed when the chronograph's second hand does not return to 0 when the chronograph is reset, including after battery replacement. Pull the crown out to position 8. Press the D button to set the chronograph's second hand to 0. The chronograph hand can be advanced rapidly by continuously pressing the D button. Once the hand has been zeroed, return the crown to its normal position. Do not push the crown to normal position while the chronograph's second hand is moving. It stops when the crown is returned to its normal position, and its new position is recognized as 0.

• Movement: Seiko VK61 quartz
• Water resistance: 10 ATM / 100 m / 330 ft
• Features: Chronograph, Date
• Battery: SR936SW
• Crystal: Double-curved mineral glass with anti-reflective coating
• Case material: Brass, brushed
• Strap material: Genuine leather strap
• Nickel free: Yes
• Max. wrist size: 7" (18 cm)
• Min. wrist size: 5 1/8" (13 cm)
• Strap width: 7/10" (18 mm)
• Case diameter: 1 5/8" (42 mm)
• Dial diameter: 1 3/8" (34 mm)
• Case thickness: 1/2" (14 mm)
• Crown height: 1/8" (3 mm)
• Lug width: 4/5" (20 mm)
• Lug to lug: 2" (51 mm)
• Weight: 2.7 oz (76 g)

Most watches have some level of water resistance. If your watch isn’t water resistant, it may be able to handle small splashes, but don’t risk it. If it has a leather strap, don’t get it wet.

• Do not move the crown or push any buttons when your watch is in contact with water, as this may let water enter the case.
  
• If your watch is not water resistant, dip a cotton swab in a bowl of warm water with a drop or two of soap in. Squeeze the tip of the cotton swab to remove most of the water and gently rub the case.
  
• If your watch is water resistant, soak a soft cloth in a bowl of warm water with two drops of mild washing-up liquid added. Wring most of the water out of the cloth and gently rub the case with it.
  
  

As a rule of thumb, genuine leather shouldn’t get wet. This includes sweat and the moisture that evaporates from your body throughout the day, which is why we recommend you don’t wear your leather-strapped watch every day and always take it off when you go to sleep. 1. If you must clean your leather strap, remove it from the case and rub it down with a clean, dry cloth. 2. Apply leather cleaner and conditioner with a soft cloth, gently massaging the lotion into the leather. 3. Finish by wiping with a clean cloth to prevent staining and let the straps air-dry overnight. Don’t wear it so tight that you have to bend the strap backward to unbuckle your watch, as this can permanently deform the leather.

• Store your watch in a dark, dry place to avoid corrosion and discoloration of the dial.
• Always replace the battery on a quartz watch as soon as it runs out. With time, an empty battery may start leaking, damaging the watch’s movement.
• Run mechanical watches at least two days a year to prevent gears and cogs from sticking.
• You should always get your watch serviced by a professional every 3 years.

Rule of thumb: Make sure your watch is the last thing you put on and the first thing you take off. - Take your watch off and store it safely before engaging in any activity that could damage it. - Take it off before engaging in any activity likely to make you sweat. - Take it off before you shower, bathe, or go for a swim. - Take it off before cooking or cleaning. - Take it off before you go to bed. - Don’t expose your watch to chemicals such as cologne, sunscreen, perfume, chlorine, hair gel, etc., as these can discolor, stain, or dull surfaces. - Try to store your watch separately in a soft enclosure to prevent scratching and rubbing. - If your watch has closures or clasps, close these to prevent tangling. - Keep your watch stored in a dry, dark place, and avoid heat fluctuation.

To remove and change your watch strap, you’ll need:

• The watch
• A replacement strap
• A soft surface such as a cloth, t-shirt, or mouse pad

You may also need:

• A spring bar tool
• Or a sharp pointed object

1. Place your watch on a soft surface. This prevents it from getting scratched or damaged.

2. If your watch has quick-release pins on the underside, push the small lever inward to release the strap.

1. If your watch has drilled lugs – small holes in the lugs extending from the main watch case – use a sharp, pointed object to push the spring bar in and release the strap. Be careful that the spring bar doesn't slide out of the strap and get lost.

1. If your watch strap has neither of these, use a spring bar tool. This is a small tool with a v-shaped tip. Use it to compress the spring bar from the underside of the strap between the lugs on the right. Using the tool, push down the ridge of the spring bar to release the strap.

First, check the lug width of your new watch to verify that it's 4/5" (20 mm). You can find all our watch straps here. Using the filters, select only the matching width to see our selection for your watch.

If your replacement strap has quick-release bars, press the bar inward and slot it into place between the lugs. You’ll feel it ‘lock’ into position.

If your new strap doesn’t have quick-release pins, use the spring bar tool again. Place one end of the pin into place, then use the tool to compress the spring bar as you slot it in place. You’ll feel it ‘lock’ in position.

Remember to take your time and be careful not to scratch the lugs or damage the new watch strap.

If you take care of your watch and keep it stored correctly, you should enjoy years of timekeeping precision. But even with the best care possible, you may find that your watch needs extra attention from time to time.

Take a look at common issues with watches here. If you can’t find what you’re looking for, our great Customer Service Team is only a phone call away.

To keep the warranty on your watch valid, don't expose it to water past the rated limit and make sure you keep the receipt.